Hitec RCD

Hitec Japan
Hitec Korea
Hitec Germany
Multiplex USA

Home
Products
Support
Where To Buy
Team Hitec
- Team Hitec Pilots
- Team Hitec Drivers
Contact Us

HOME
Support
FAQ's
FAQs
Radios
Flash 5
Q. Will this transmitter work with full house sail planes?

Q. Will this transmitter work with full house sail planes?

A. A "full house" sail plane requires the use of at least 6 channels.

Flash 5

Q. How can I change the frequency on my transmitter?
Q. Is there another manufacturer that has a radio that my transmitters trainer function is compatible with?
Q. Why is my elevator trim not working?
Q. When I set the end point on my servo, it will only affect one direction.
Q. Why do the centers on my servo move when I switch from high to low dual rate?
Q. What other receivers will my Flash work with?
Q. What is the maximum range of the Flash transmitter?
Q. How do I do a range check?
Q. When I use elevon mixing, how do I adjust the throw of the elevator only?
Q. Does Hitec make the Flash System X radios in the Ham Band?
Q. Will this transmitter work with full house sail planes?
Q. When I enable aileron-rudder mix, the rudder only moves in one direction when the aileron stick is moved?
Q. When I enable the ELEVON mix, my elevator behaves like an aileron and visa versa.
Q. Why is my receiver not working with My Flash when I have the EPA and Dual Rates at 125%?
Q. How do I use my transmitter in a buddy situation?

12115 Paine Street, Poway, CA 92064 | Ph: 858.748.6948 | Fax: 858.748.1767 | www.hitecrcd.com

Contact Us | Sitemap | Terms of Use